联系我们
  • 山东鼎胜制冷设备有限公司
  • 地址:济南天桥区粟山路泉利重配城
  • 全国咨询热线:400-0966-610
  • 电话:0531-85968762
  • 手机:15725158383
  • 联系人:邓老师
济南冷库设计知识首页 - 济南冷库设计知识

装配式冷库结构的特点的了解

作者:admin 来源:本站 发布时间:2018-2-14 16:25:09

装配式冷库的作用、使用条件和结构要求与土建式冷库相似。它为食品冷却、冷藏及其冷冻提供必要的条件,具有良好的隔热、防潮性能和承载强度。
The function, use condition and structure of the assembly type cold storage are similar to the civil cold storage. It provides the necessary conditions for the cooling, refrigerating and freezing of food, and has good heat insulation, moisture resistance and bearing strength.
装配式冷库按其容量、结构特点又有室外装配式和室内装配式之分。

According to the characteristics of its capacity and structure, the assembly type cold storage is divided into outdoor assembly and indoor assembly.

济南冷库设计

室外装配式冷库均为钢结构骨架,并辅以隔热墙体、顶盖和底架,其隔热、防潮及降温等性能要求类同于土建式冷库,其结构如图2-6所示。室外装配式冷库容量一般为500——1000t,适合商业、食品加工业使用。
The outdoor assembly cold store is all steel structure skeleton, supplemented by the heat insulation wall, the top cover and the underframe. Its thermal insulation, moisture-proof and cooling performance requirements are similar to the civil built cold storage. Its structure is shown in Figure 2-6. The capacity of outdoor assembly cold storage is generally 500 - 1000t, suitable for commercial and food processing industry.
装配式冷库
Assembly cold storage
室内装配式冷库又称活动装配冷库,基本结构如图2-7所示,容量一般为5——100t,必要时可采用组合装配,容量可达500t以上。室内装配式冷库适合宾馆、饭店、菜场及商业食品流通领域使用。装配式冷库具有结构简单、安装方便、施工期短、轻质高强度及造型美观等特点。
The indoor assembly cold storage is also known as the movable assembly cold store. The basic structure is shown in Figure 2-7. The capacity is generally 5 -- 100t, and when necessary, the combined assembly can be carried out, with the capacity of 500t. The indoor assembly cold storage is suitable for the use of hotels, restaurants, vegetable farms and commercial food circulation. The assembly style cold storage has the characteristics of simple structure, convenient installation, short construction period, light quality and high strength and beautiful appearance.
室内装配式冷库库体主要由各种隔热板组即隔热壁板(墙体)、顶板(天井板)、底板、门及支承板和底座等组成。它们是通过特殊结构的子母钩拼接、固定的,以保证冷库具有良好的隔热性和气密性。冷库的库门除能灵活开启外,更应关闭严密,使用可靠。
The indoor assembly type cold storehouse is mainly composed of various insulation panels, namely, heat insulation wall panels (wall), roof (patio plate), floor, door and supporting plate and base. They are spliced and fixed by the special structure of the mother hook to ensure that the cold storage has good heat insulation and air tightness. Cold storage doors can open and flexible, more should be closed tight, reliable use.
室内装配式冷库
Indoor assembly cold storage
室内装配式冷库的隔热板均为夹层板料,即由内面板、外面板和硬质聚氨酯或聚苯乙烯泡沫塑料等隔热芯材组成。夹层板的内外面板多为玻璃钢板,亦有薄钢板、铝合金板或其他塑料板。冷库以夹层板作墙体,其接缝连接应牢固、平整、严密。其密封材料应无毒、无臭、耐老化、耐低温,有良好的弹性和隔热、防潮性能。
The heat insulation boards of the indoor assembly cold store are all sandwich plates, which are composed of inner panel, outer panel and rigid core polyurethane or polystyrene foam plastics. The inner and outer panels of the sandwich plate are mostly glass plate, and also have thin plate, aluminum alloy plate or other plastic plate. The cold storage is made of sandwich plate as the wall, and its joint connection should be firm, smooth and tight. Its sealing material should be non-toxic, odorless, aging resistance, low temperature resistance, good elasticity, heat insulation and moisture resistance.